ScanNCut How To Make A Personalised Door Hanger

Dont forget to use this months host code when you check out in my online shop, to get an extra thank you treat from me.

This is a fairly simple project made using shapes from my CM900 machine, I think they will also be available in previous models.

This is what I made, I decorated it with shapes also from the machine. I hope you like it and let me know if you will try it.

The card stock is from my online shop I will list the supplies below with direct links for you.

Product List
Door Hanger

If Ive helped or inspired you, I would love you to shop with me Here

Sign up to My Newsletter Here

Makers Facebook Live Tonight!

Hi everyone just a quick reminder, that I am doing a Facebook live tonight with the Makers Team, we will be live at 7pm UK time on their Facebook page Here

If you have any questions, either send them to team@makers.com or leave a comment here on this blog post for me and I will try and look at them before we go live.

This will probably be our last live before Christmas and Im not sure what we will be doing but we try and answer as many questions as we can, so please join us.

Thanks Ashley

How To Make A Decorative Frame In Canvas Workspace Using Shapes From you ScanNCut Machine

Dont forget to use this months host code when you check out in my online shop, to get an extra thank you treat from me.

In todays video I chose some shapes from my CM900 then I uploaded them to Canvas Workspace online, and I made them into a decorative frame. I then transferred them back to the machine and cut and made my project. This is what I made

Ive used some Stampin Up supplies so I will list them below for you.

Product List

If Ive helped or inspired you, I would love you to shop with me Here

Sign up to My Newsletter Here

How To Use A ScanNCut And Make Your First Cuts

Dont forget to use this months host code when you check out in my online shop, to get an extra thank you treat from me.

So if you follow my blog you will know that recently I had the pleasure of working with the team from Makers at the NEC Birmingham, where they were launching the sale of the new ScanNCut SDX2200 disney cutting machine which is exclusive to them.

Over the two days that I was there I got to meet some lovely crafters, who were either buying the new machine or who already owned a previous model.

A reoccurring theme from talking to so many of them was that they had a CM model machine but they were scared to use it. Some told me it hadn’t even come out of the box, some told me it was out of the box but had not been used for years.

These machine are expensive and deserve more that being left in a box or on a shelf untouched!

So with that in mind I tried to encourage as many of them as possible to go home and have a go, but I thought I would make a video to show people what the machine icons and features are and walk people through making their first cuts and a simple project.

This is what I am showing how to make and its all done directly on the ScanNCut machine and made from inbuilt simple shapes.

If you follow the video step by step you can make this yourselves, honest.

How to use a scanncut and make your first cuts

I am going to make a few more videos, please make sure you are subscribed to my Youtube channel so you don’t miss them.

The next one will hopefully be about using the test cut facility and setting your blade depth and cutting pressure.

Sign up to My Newsletter Here

If Ive helped or inspired you, I would love you to shop with me Here

Disney 30,000 Giveaway – Winner

Dont forget to use this months host code when you check out in my online shop, to get an extra thank you treat from me.

Hi, I want to thank everyone who took the time to leave a comment on my 30,000 subscriber post last week and thank you all for the lovely comments.

I offered a Disney Paper Crafts Collection 1 activation card, which you will need to activate in ScanNCut Canvas online, don’t worry if you don’t know how to do this as its the subject of my next video which will be on my Youtube channel on Saturday 16th November.

The winner is

Anna Kluytmans

Please contact me within the next week with your details, so that I can get it into the post

If I’ve not heard from you within a week I will draw it again and offer it to someone else. Thank you once again

If Ive helped or inspired you, I would love you to shop with me Here

Sign up to My Newsletter Here

ScanNCut How To Set Blade Depth & Cut Pressure – Test Cutting

Dont forget to use this months host code when you check out in my online shop, to get an extra thank you treat from me.

From talking to people at the NEC recently where I had the pleaseure of working with the Makers team who were launching the new ScanNCut Disney SDX 2200 with the auto blade technology.

Several lovely crafters told me they didnt use their old SNC machines because they were scared of cutting through the mat or just didnt know where to begin and were worried about wasting card.

Well let me say right from the start you have to be prepared to have some trial and error, with any electronic cutting machine. If you invest the time to learn how your machine works and its capabilities you will reap rewards in the long run.

In todays video I am going back to basics and will show you some tips on how to get started, with setting your blade depth and cut pressure for your chosen media so that you can make your first cuts.

It really is simple and once you understand the principles you will be able to apply them to all types of card and paper.

I hope you enjoy the video and that it helps. Please give the video I Thumbs up and don’t forget to subscribe!

How To Set Your Blade Depth & Cut Pressure

If Ive helped or inspired you, I would love you to shop with me Here

Sign up to My Newsletter Here

ScanNCut Snow Card

Dont forget to use this months host code when you check out in my online shop, to get an extra thank you treat from me.

Todays card was just an idea i had for a simple card and i decided to use the Let it snow stamp set from Stampin Up and my ScanNCut.

This is what I made, with a few letters and a basic shape which are pre loaded in the SNC machine. The video is below and a list of all the Stampin Up supplies with direct links to my online shop.

Product List

Sign up to My Newsletter Here

If Ive helped or inspired you, I would love you to shop with me Here

My Day At The NEC With Makers

As you will know if you live in the UK the only place to buy your ScanNCut machine and accessories has been from Create and Craft, well this is about to change.

The new ScanNCut SDX2200 Disney machine has been launched today at The Creative Craft Show NEC Birmingham, and I’ve had the pleasure of working with the Makers team showing off this fabulous new machine with its auto blade technology and pre installed Disney designs.

This machine is a pleasure to use and is whisper quiet, they are offering free workshops all weekend which are getting booked up fast, so if you are going and want to use the machine and see for yourself what its all about then get yourself down to the NEC you can find Makers on stand F08.

They are taking pre orders and expect the machine to be with you in early December, this machine wont be available anywhere else.

Also available at the show are mats, blades, etc and the Disney activation cards for all the CM & SDX series machines. Have a look at their website makerssuperstore.com to see what they are offering, they will be adding more products over the coming months working towards their full launch in the new year.

I was asked to do an un boxing and first project out of the box for them which I filmed recently which should be available to view soon.

Makers want you to have the best possible experience from your product and encourage you to use it, this will hopefully be done through demonstrations and workshops, these are exciting times for all of us.

I will be back at the NEC on Saturday with Makers, so please come along and say hi.

ScanNCut Sticker Kit Part 3

So this is the third part of my video series on using the ScanNCut Sticker Kit, there are many ways to use the sticker kit both laminated and unlamented and I am sure you will be able to find lots of ideas on the internet.

In this video I thought I would concentrate on how to make planner stickers using the kit, as they seem very popular at the moment and some of you may find it helpful.

sticker1

 

 

 

 

 

 

 

 

The video is Here

SNC Canvas Diamond Fold Card

Heres another shaped card tutorial using SNC Canvas. This diamond fold card shape was popular some time ago, but I thought I would show you how to make it in Canvas.

Once made you can resize it as you like, this one will fit into a 5×5 envelope.

I hope you like it.

diamond_fold_card

The video is Here